Every GPU on every machine, live on one wall.
$49.99
GPU Monitor Lite
AppYour graphics card live on the desk: load, memory, heat.
Not made by NVIDIA. This is an independent app that works with NVIDIA graphics cards. It is not created by, endorsed by, or connected with NVIDIA Corporation, and NVIDIA and GeForce are trademarks of NVIDIA Corporation - used here only to say what this app works with.
Requirements
- Chip
- ESP32-P4, ESP32-S3
- Resolution
- any supported panel
- Package size
- 200 KB
What you get
- A cockpit gauge for one NVIDIA card: live utilisation, video memory, temperature, clock, power draw and performance state, with rolling history charts and a warning when the card is being throttled. Name your TOPG server on the device or over USB and the HUD subscribes to its live feed over Wi-Fi, a second at a time. Save several machines and switch which one the gauge is watching.
- TOPG is the free agent that feeds it. It is a small open source program you run on the machine the graphics card is in - download a build for Windows, Linux or macOS, compile it yourself, or run it in Docker. It reads the card the same way nvidia-smi does and streams the numbers to your device over your own network, once a second. Nothing leaves your network and there is no account to make. Download it from https://github.com/sukesh-ak/TOPG.
Features
- A cockpit ring for GPU load, with the reading big enough to catch from across the room.
- Video memory as a percentage, a used-of-total figure and a filling cell grid.
- Temperature, core clock, power draw, memory-controller load, free VRAM and performance state.
- A throttle warning that turns the temperature red when the card is being held back.
- Rolling history charts for load and memory, and a bar history for video memory.
- Live over a WebSocket to the free TOPG agent on the machine being watched - one second per update.
- Save several machines and switch which one the gauge is watching, on the device or over USB.
- Fills the glass on every supported panel, portrait or landscape, from 2.4 to 10.1 inches.
Set up on the device
Point the app at the machine you want to watch without typing on the screen: install it on your device, plug the device into this computer, enter the address below and press Send. That is the machine running the free TOPG agent - its address on your network, and the port the agent listens on (8080 unless you changed it). The device saves it and connects straight away; you can add more machines on the device itself and switch between them.
Sent straight to your device over the cable. It does not reach us.
Reviews
No reviews yet
Nobody has reviewed this yet. If you own it, yours would be the first.
Write a review
Reviews come from people who own it.
$9.99per device, one-time
The trial runs on one of your devices for 24 hours, so you can see it working on your own board before you buy. One per app.
Supported devices
9 certified
Already own it?
Everything you own is in My apps, and appears in the store on any device you have claimed. New device? Enrol it with the browser flasher.
$9.99