Set up Makerfabs MaTouch S3 Parallel 4.3"
Set up your device
Needs the board plugged inRun the steps in order the first time. Installing is a one-off — after that the device takes its updates over the air — and the rest are here whenever you want to change the Wi-Fi, the clock or the location.
Setting up over USB needs Chrome, Edge, Opera or Firefox 151 or
later. Safari cannot do it.
On Linux your user needs to be in the
dialout
group (uucp on Arch) before the browser can see
the board. Without it the device picker opens empty. Log out
and back in after adding yourself — group membership is
only picked up at login.
Check the marking on your board
This model shipped in more than one revision, and they take different firmware. The revision is printed on the board itself.
V1.1
Not supported
V1.2
Not supported
V1.3
Supported
V2.0
Expected to work, not yet bench-tested
V3.1
Expected to work, not yet bench-tested
Sign in to see the build for this board.
Not the right board? Choose a different device.
Connect it to your Wi-Fi
Device address:
Set the clock's timezone
Add this device to your account
Set the location for weather
Pair an accessory
Setting up a device over USB needs Chrome, Edge, Opera or
Firefox 151 or later. Everything else on this page works
anywhere.